Xilinx spartan 6 reference manual

Saturn is an easy to use FPGA Development board featuring Xilinx Spartan-6 FPGA. Saturn is specially designed for experimenting and learning system design with FPGAs. This development board features Xilinx XC6SLX series FPGA with FTDI's FT2232H Dual-Channel USB device. The demo documented on this page is deprecated as it has been superseded by demos that use later hardware and tool versions.. This MicroBlaze port is produced using version 13.1 of the Xilinx ISE Design Suite (Embedded Edition), supports version 8.10 of the MicroBlaze soft processor core, and was developed and tested on a Spartan-6 FPGA based SP605 Evaluation Kit. The TIDA-00716 design is a compact, integrated solution for the Xilinx Spartan 6 FPGA. This design showcases the TPS650250 as an all-in-one IC used to supply the rails needed for powering the Spartan 6. This design is based on the Spartan 6 LXT family, but can be repurposed to power the Spartan 6 LX family. www.ti.com Spartan-6 Libraries Guide for Schematic Designs 4 w w w.xilin x.c o m UG616 (v 13.3) October 26, 2011 INDUSTRY PACK XILINX HARDWARE REFERENCE MANUAL Revision 1.0 August 2005 A read at this location will identify the XILINX SPARTAN XC2SXXXE-FT256 FPGA implemented on board. Value Part # $00 50E XILINX SPARTAN2e and will set the bit #7 to "1" 'switching to EPM7160 programming mode. The Xilinx XC6SLX9-2CSG324C device designed onto the Spartan-6 FPGA LX9 MicroBoard is a member of the logic-optimized Xilinx Spartan-6 LX FPGA family. This family is built on a mature 45 nm low-power copper process technology that delivers the optimal balance of cost, power, and performance. Digilent Basys2 Board Reference Manual Revision: November 11, 2010 1300 Henley Court | Pullman, WA 99163 (509) 334 6306 Voice and Fax Introduction . The Basys2 board is a circuit design and implementation (platform that anyone can use to gain experience building real digital circuits. Built around a Xilinx Spartan-3E Field Digilent Basys2 Board Ref