Edmi mk10 meter manual

This model is a 100A Direct connected meter. Product Specification. Measurement. Class 1 and Class 2 (MID Class B & Class A; Compliance to IEC62052-11, IEC62053-21, IEC62053-23; EDMI MK10 Manual (2.43MB) Related Products. Circutor Cirwatt 410D 100A Direct Connected 3-Phase MID Energy Meter Series Mk10D readings. EHtL = total net kW imported into property; EHtL 3 = another phase (2-phase has this as zero) INtl = net solar generated kW exported to the grid; again 3-phase people might have a second and 3rd readings INtl2, INtl3. INL1 = net generated and not used on the property: again there might be an INL3 reading. posted 2014-Jun-17, 11:15 am AEST. I've got a solar system installed and an EDMI Atlas Mk10 meter - that's the one with the four directional arrows at the top left: < = -P. > = +P. ^ = +Q. v = -Q. I think this is live indication of current flow, i.e. from grid / to grid, regardless of what the current display set is. mid approved ct operated advanced three phase electronic multifunction revenue meter, including sim card mk10a - advanced three phase up to 60 user-defined screens of any meter parameter edmi multidrive software available for large scale ami & amr.4 nov 2010 edmi pty ltd. 162 south pine product names are trademarks or registered trademarks of … Three phase solid state Time Of Use meter.type : Atlas mk10DkWh and kVArh meter3 Phase 100 Amps max. Description The Mk10A is a three-phase (poly-phase), NMI pattern approved meter with additional communications capabilities and basic Power Quality indication, advanced commissioning functionalities and large memory storage. (up to 24 years of 30 minute data depending on number of recording channels). Advanced Three Phase Electronic Revenue Meter. Atlas Series, Class 1 & Class 2. Built on the advanced Atlas metering platform, the Mk10D is a variant of the reliable Mk10. The Mk10D adds a 100Amp relay integrated into the meter, which allows disconnection or reconnection of electrical services remotely. GPRS Capability. Power Quality Indication. Description Built on the advanced Atlas metering platform, the Mk10D adds three 100A UC3 compliant relays into the meter which allows for disconnection and reconnection of electrical services remotely. Standards and Compliance Class 1 and Class 2 IEC 62052-11, 62052-21, 62053-21, *62052-31, 62053-23 The Mk10A is a three-phase (poly-phase), NMI pattern approved meter with additional communications capabilities and basic Power Quality indication, advanced commissioning functionalities and large memory storage. (up to 24 years of 30 minute data depending on number of recording channels). The meter is available as bot a Current Transformer (CT The rectangular shaped bracket fits this meter type best. Simply fix the bracket so you can see the left most red light flashing through the hole in the bracket (usually marked Pulse 1 or OP1). See the image below. Then head to powerpal.net/install and follow the instructions to complete your installation. My meter steps through the following: L1 voltage, L2 voltage, L3 voltage, L1 current, L2 current, L3 current, PF (Power Factor), and instantaneous net usage (kWh). To go back to Set A, press Select again for 1 second, or just leave it to auto-scroll through all the data items in Set B and it will revert to Set A.